Crawfordsville, IN

Hot Rolled
(Produced as Black, P&O and P&O Temper Passed)
Gauge: .055” min. - .625” min./ (.240” Maximum Gauge Limitation on Pickle Line)
Width: 34.00” - 55.00” (52.50” Maximum Width on Pickle Line)
Grades: Carbon Range C1001 – C1095, HSLA (40 – 80 (270 – 550 MPa) minimum yield), Line Pipe Grades (X42 – X65), Abrasion Resistant Grades, ASTM A606 Type 4, Alloy Grades


Cold Rolled
Gauge: .013" min - .100"min (CRFH .012” min. - .100” min.)
Width: 36.00” – 52.00”
Grades: Carbon Range C1002 – C1074, 1/4 Hard, 1/2 Hard, and Full Hard, HSLA (up to Grade 60 (450MPa), Motor Lamination Types 1 – 8, Alloy Grades


Galvanized
Gauge: .013” min. – .130” min.
Width: 34.00” – 52.50”
Grades: CS, FS, LFQ, Structural Grades 33 – 80 (230-550MPa), HSLA (up to 80 (550MPa) minimum yield), Medium Carbon (up to C1035)
Coating Weights: G30 – G185


Castrip® UCS (Ultra-thin Cast Sheet)
(Available as Black, P&O and Galvanized Sheet)
Gauge: .033” min - .057” min
Width:42.00” – 48.50” cut edge
Grades: CS, SS, Grades 33 - 60, HSLA Grade 50, A606 Type 4